Briggs & Stratton 750 DOV Series Spécifications télécharger pdf (Page 18)

14

1

1

Adjust Alternator Air Gap

1. Remove spark plug.

2. Loosen alternator screws (A, Figure 1-12).

and slide alternator (B) away from

flywheel.

3. Tighten one screw to secure alternator.

4. Line up flywheel magnet (D) with

alternator.

5. Insert a strip of gauge material (C)

(0.006-0.014 in. or 0.15-0.36 mm)

between flywheel magnet and both legs of

alternator.

6. Loosen screw and allow magnet to pull

alternator against gauge.

7. Tighten fasteners and torque to values

listed in Section 12 - Engine

Specifications.

8. Rotate flywheel to remove gauge.

Figure 1 - 12

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 77 78

Commentaires sur ces manuels

Pas de commentaire